LLMD

linux + lighttpd + mysql + django

1. install lighttpd
a. 執行升級 [RPMforge] 套件
rpm -Uvh ftp://fr2.rpmfind.net/linux/dag/redhat/el5/en/i386/dag/RPMS/rpmforge-release-0.3.6-1.el5.rf.i386.rpm

b. 使用yum安装lighttpd
yum install lighttpd lighttd-fastcgi

You cannot log on over the network, and any operation that involves Active Directory causes the following error message:

Naming information cannot be located because:
The workstation driver is not installed.
Contact your system administrator to verify that your domain is properly configured and is currently online.


CAUSE
The Client for Microsoft Networks component is actually the Workstation service. If you remove this service, the Netlogon and RPC Locator services are also removed. When you reinstall the Client for Microsoft Networks component, the Netlogon and RPC Locator services are also reinstalled, but the Netlogon service is not configured to depend on the Server service when the computer starts.

RESOLUTION
Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base:
322756 (http://support.microsoft.com/kb/322756/) How to back up and restore the registry in Windows

1. If you did not reinstall the Client for Microsoft Networks component, follow these steps to install it:
a. In SBS 2000, right-click My Network Places, and then click Properties. In SBS 2003, open Control Panel , and then double-click Network Connections.
b. Right-click the internal network connection, and then click Properties.
c. Click Install, click Client, and then click Add.
d. Click Client for Microsoft Networks, and then click OK.
e. Click OK in each dialog box until all networking properties are closed, and then restart the Small Business Server (SBS) 2000 server.
2. Log on to the computer. Ignore any warnings about services that cannot start. Start the Services tool.
3. Verify that the startup type for the RPC Locator service is set to Automatic, and then start the service.
4. Verify that the startup type for the Netlogon service is set to Automatic. Do not start the Netlogon service yet.
5. Configure the Netlogon service to depend on the Server service:
a. Start Registry Editor (Regedt32.exe).
b. Locate and then click the DependOnService value under the following key in the registry:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Netlogon
c. On the Edit menu, click Multi String, type LanmanServer on a line by itself, and then click OK.
d. Quit Registry Editor.
6. In the Services tool, start the Netlogon service.
7. Verify that you can use Active Directory by using a program such as Active Directory Users and Computers to view or modify Active Directory.
8. Restart the server.
9. If the server takes a long time to restart, or if you receive warnings that services cannot start, use the Services tool to verify that the Netlogon service is set to Automatic and has started. You may have to set the startup type two times.

alice bot on miranda IM

1. reference

http://en.wikipedia.org/wiki/SmarterChild

2. download miranda IM first

3. download the plugin

http://addons.miranda-im.org/details.php?action=viewfile&id=326

incompatibility of win2k3 r2, win2k3 sp1, and win2k

Before you can introduce Windows Server 2003 domain controllers, you must prepare the forest and domains with the ADPrep utility.

* ADPrep /forestprep on the schema master in your Windows 2000 forest.
* ADPrep /domainprep on the Infrastructure Master in each AD domain.

ADPrep is located in the i386 directory of the Windows Server 2003 install media.

Note: In Windows Server 2003 R2, ADPrep is not located in the same folder as in the older Windows Server 2003 media, and instead you need to look for it in the second CD. You see, Windows Server 2003 R2 comes on two installation disks. Installation disk 1 contains a slip-streamed version of Windows Server 2003 with Service Pack 2 (SP2). Installation disk 2 contains the Windows Server 2003 R2 files.

The correct version of the ADPrep.exe tool for Windows Server 2003 R2 is 5.2.3790.2075.

You can find the R2 ADPrep tool in the following folder on the second CD:

drive:\CMPNENTS\R2\ADPREP\



Note, running adprep on the PDC should be good enough.

script for collecting sys info

#!/bin/sh

do_cmd_output() {
echo "$*"
$*
echo
}

do_file_output() {
for file; do
[ -f $file ] && do_cmd_output cat $file
done
}

oom_output() {
echo '======================================================================='
date
echo '======================================================================='
echo
do_file_output /proc/meminfo
do_cmd_output ps -Aww -o pid,ppid,pcpu,vsize,rss,majflt,tty,stat,wchan,command
do_cmd_output top -b -n 1
do_file_output /sys/block/sda/queue/stats
do_file_output /proc/nbt/0/icore_stats
do_file_output /proc/nbt/0/icore_dstats
do_file_output /proc/nbt/0/icore_mstats
}

while true
do
oom_output >> /var/log/oom_profile.log
sleep 30
done

Cygwin: Can’t quit Emacs using C-x C-c

On some installations of Cygwin on Windows, it is impossible to exit Emacs using C-x C-c. After digging around in the message lists, I discovered that the C-x key Control-C is trapped by the OS.

UPDATE: Specifically, Control-C handling on Windows is tied to a console. Only a process that is attached to a proper Windows console can receive Control-C or Control-Break events.

The fix for this is to set a Windows environment variable:

CYGWIN=tty

Then quit all of the Cygwin windows and start them up again. Works like a charm.

UPDATE: Also works for any other situation where Windows is making Control-C kill your process instead of handing it over to the application.

add printer to AD server

1. Change the group policy to allow printer can be published:

-Right click on domain controller, click "property"
-Click "group policy", and click "edit"
-Go to "computer configuration > administrative templates > printers", and enable "allow printers to be published"

2. Find the printer and move to OU you created

-Right click on domain controller, choose "find"
-Change find to "printers" in server
-Click "find now", you will get all the shared printers
-Pick the one you want to add, right click, choose "move", and move it to the desired OU